DC Controllers
NEMA 1 / IP50 DC Controllers – up to 2HP
-
KBMD-240D
Features:
- Plug-in Horsepower Resistor. Allows a single model to be used on a wide range of motors
- Dual Voltage Switch. Used to select AC line voltage operation of 115 or 230V
- Built-in AC Line Fuse
- MOV Transient Protection (20 JOULE)
- Trimpots: MIN, MAX, IR, CL, ACCEL, DECEL
-
KBWM-240
Features:
- Plug-in Horsepower Resistor® automatically calibrates IR Comp. and Current Limit (CL)
- AC line and armature fusing
- Rugged all-metal NEMA 1 enclosure
- AC line ON/OFF switch with “power on” indicator lamp
- Patented KBMMTM speed control module prevents demagnetization of PM motors
NEMA 4 / IP65 DC Controllers – up to 2HP
-
KBPC
Features:
- Plug-in Horsepower Resistor® automatically calibrates IR Comp. and Current Limit (CL)
- Rugged all-metal NEMA 1 enclosure
- AC line ON/OFF switch with “power on” indicator lamp
- Patented KBMMTM speed control module prevents demagnetization of PM motors
-
KBRC-240D
Features:
- Electronic Overload Protection
- The exclusive Short Circuit and Timed Current Limit (TCL) circuitry prevents motor burnout and demagnetization of PM motors.
- Input Voltage, Output Voltage, Current Range, Input Signal, Armature or Tachometer Feedback, and Tachometer Voltage.
- MIN, MAX, ACCEL, DECEL, IR, CL and TCL. Standard features include an Armature fuse
- Electronic Start-Stop, and diagnostic LED Indicator Array for “power on”, “stop” and “overload.”
-
KBPW-240D
Features:
- Short Circuit Protection: Protects control from short circuits
- Electronic Motor Burnout Protection: Shuts down the control if a prolonged overload condition exists
- Active Bridge: Limits AC Line inrush current
- Power Transistor Short Circuit Protection: Prevents high speed run away if the power transistor short
- Heat Spreader: Prevent power transistor failure during momentary overload conditions
- LEDs: Power on (ON), Stop (STOP) and Overload (OL)
- Auto AC line select: COntrol automatically adjusts for 115 VAC or 230 VAC - 50/60 Hz
- Start/Stop Switch: Provides electronic start/ stop function
- Output Run Relay: Indicates state of control - (Run or Stop)
Chassis Mount DC Controllers – up to 5HP
-
KBIC
Features:
- Plug-in Horsepower Resistor® (see chart) allows a single model to be used on a wide range of motors
- MOV Transient Protection
- Trimpots: MIN, MAX, ACCEL, IR & CL
- MOV Transient Protection
- Voltage Following
- InhibitTM and Auto Inhibit®
- Dual Voltage Capable on 230V “D” and “DS” Models
-
KBMM
Features:
- Plug-in Horsepower Resistor® 5 – Eliminates the need to calibrate control for IR Comp and Current Limit when used on various horsepower
- Auto Inhibit® – Allows the control to be rapidly switched “on” and “off” using the AC line
- Inhibit and Enable – Allows the control to be turned “on” and “off” using electronic switching
- Trimpots: MIN & MAX Speed, IR Comp, Current Limit, ACCEL & DECEL
- Model KBMM-225D can operate on 115 or 230 VAC input with 90 or 180 VDC motors. Jumper selectable
- Model KBMM-225 operates on 230 VAC input with 90 or 180 VDC motors
- MOV Transient Protection • SMTConstruction
- Power On and Current Limit LED Indicators
- Built-in Armature and AC Line Fusing5
- Main Speed Potentiometer (5kΩ)
-
KBCC / KBCC-R
Features:
- Electronic Overload Protection
- Built-in Armature Fusing
- LEDʼs for “Power On,” “Overload” and “Stop”
- Electronic Start-Stop
-
KBPB
Features:
- Plug-in Horsepower Resistor®
- Built-in AC Line Fuse (included), Armature Fuse (distributor supplied)
- Trimpots: MIN, MAX, IR, CL, ACCEL, DECEL and Aux Speed.
- Auto Inhibit®, InhibitTM and Enable
- MOV Transient Protection
- CL LED Indicator
- Voltage Following
- Tachometer or Armature Feedback
KBMG
Features:
- Jumper Selectable Features Operation Mode: Speed, Torque AC Line Voltage (VAC – 50/60 Hz): 115, 230 DC Armature Voltage (VDC): 90, 180 Tach-generator Voltage (VDC/1000 RPM): 7, 50 DC Current Output Ranges (ADC): (0.17 – 1.0, 1.7 – 101) Analog Input Voltage (VDC): 0 to ±10, 0 to ±15 Enable: Coast to Stop (CTS), Regenerate to Stop (RTS)
- Trimpot Adjustments Dead Band (DB) • Response (RESP) • IR Compensation (IR) Forward Current Limit (FCL) • Reverse Current Limit (RCL) Maximum Speed (MAX) • Forward Acceleration (FACC) Reverse Acceleration (RACC)
- LEDs Power On (PWR ON) • Overload (OL)
KBRG
Features:
- Enable Circuit
- Two (2) or Three (3) Wire Start/Stop
- Overload Shutdown with Timed CL
- External Relay Contacts
- Function Indicator Lamps: Power On, Current Limit, Forward Enable, Reverse Enable
- Protection: Fusing for AC Line, Armature and Control Circuit, MOV Transient Protection, Auto Inhibit®, Rapid Response Current Limit Circuit, Regen Overspeed Protection
Plug-in Horsepower Resistor
Features:
- Required on all speed controllers except KBCC-255, KBRG, KBMG, KBPC
- Horsepower resistor sold separately
Fuse
Features:
- A Fuse required on all Speed controllers except KBCC-255
- Fuse is sold separately
Battery Powered DC to DC Motor Control
-
KBBC
Features:
- The KBBC series of battery powered viarable speed controls are designed for 12,24,36 and 48 Volt PM and Series wound DC motors. Microcontroller design provides superior performance and ease of tailoring to specific applivcations. Operating in a regenerative mode, precise and efficient control is obtained using state-of-the art MOSFET technology. The KBBC operates at a switching frequency if 16 kHz, whic provides high motor efficiency and quiet operation.
- The KBBC contain many standard features such as current limit, short circuit protection, speed potentiometer fault detector, overtemperature sensing, and undervoltage/overvoltage protection.
- The control contain a built-in heat sink that also serves as a mounting base.
KBBW
Features:
- The KBBW series of Pulse Width Modulated (PWM) DC/DC motor speed controls provide excellent dynamic response to load variations. The efficient PWM waveform produce an almost pure DC current to the motor (form factor <1.05), which pulse current limit provides short circuit protection and prevents control damage due tp short motors. Excellent load regulationis achieved with armature feedback.
- The Plug-in Horse Power Resistor (supplied separately) eliminates the need for recalibrating the IR Compensation and Current Limit setting when the control is used on various horsepower motors. Adjustable trim pots allow the drive to be tailored to specific applications.
- The 5potentiometer (supplied), a 0-5 Volt DC analog signal, or a PWM mivroprocessor output signal can be used to control motor speed. The optional Auxiliary Heat Sink Kit increases the drive’s current raiting from 14 Amps DC to 20 Amps DC.
Wall Mount Triac Fan Controller
Features:
- Built-In On/Off AC Line Switch
- Minimum Speed Trimpot
- RFI Filter (Provides RFI and EMI Suppression)
- All Models Mount in a Standard 2” x 4” Electrical Wall Box
- Agency Approvals* UL Listing / Recognition CSA Certified ISO-9001: 2000 QMS Certified
For AC Drive (KB Penta)
For Accessories
